CRL 7" x 7/8" 220X Grit Polyester Back Sanding Disc Quantity:Pack of 50 The CM1030 is the ideal

The CM1030 is the ideal tool to use during the manufacture of Low-e Insulating Glass units

Always wear hand and arm protection when handling glass with sharp edges

drilling a 2" (51 mm) hole in 1/4" (6 mm) mirror can be done in less than ten seconds while using a properly dressed drill bit (tests done under controlled conditions)

they should be used in a precision machine

The CRL Diamond Hand Pad Set> consists of one of each of the four grits below

CRL 7" x 7/8" 220X Grit Polyester Back Sanding Disc Quantity:Pack of 50 The CM1030 is the idealFast Grinding 100% Polyester Backed Discs Bolt On Type with Hole in Center Fits Most Disc Sanders Three Popular Sizes: 5", 6" and 7" (127, 152 and 178 mm) Our Silicon Carbide Sanding Discs come in 5", 6" and 7" (127, 152, and 178 mm) diameters to fit most popular brands of disc sanders. They have 100% polyester backing that lets you use them wet or dry. Available in five grits an come 50 discs per box. MOST POPULAR GRITS FOR GLASS: 60X Extra Rough,